National prospective cohort study of the burden of acute small bowel obstruction.

Background: Small bowel obstruction is a common surgical emergency, and is associated with high levels of morbidity and mortality across the world. The literature provides little information on the conservatively managed group. The aim of this study was to describe the burden of small bowel obstruction in the UK. Methods: This prospective cohort study was conducted in 131 acute hospitals in the UK between January and April 2017, delivered by trainee research collaboratives. Adult patients with a diagnosis of mechanical small bowel obstruction were included. The primary outcome was in-hospital mortality. Secondary outcomes included complications, unplanned intensive care admission and readmission within 30 days of discharge. Practice measures, including use of radiological investigations, water soluble contrast, operative and nutritional interventions, were collected. Results: Of 2341 patients identified, 693 (29·6 per cent) underwent immediate surgery (within 24 h of admission), 500 (21·4 per cent) had delayed surgery after initial conservative management, and 1148 (49·0 per cent) were managed non-operatively. The mortality rate was 6·6 per cent (6·4 per cent for non-operative management, 6·8 per cent for immediate surgery, 6·8 per cent for delayed surgery; P = 0·911). The major complication rate was 14·4 per cent overall, affecting 19·0 per cent in the immediate surgery, 23·6 per cent in the delayed surgery and 7·7 per cent in the non-operative management groups (P < 0·001). Cox regression found hernia or malignant aetiology and malnutrition to be associated with higher rates of death. Malignant aetiology, operative intervention, acute kidney injury and malnutrition were associated with increased risk of major complication. Conclusion: Small bowel obstruction represents a significant healthcare burden. Patient-level factors such as timing of surgery, acute kidney injury and nutritional status are factors that might be modified to improve outcomes.

Cost-effectiveness of emergency versus delayed laparoscopic cholecystectomy for acute gallbladder pathology.

BACKGROUND: The optimal timing of cholecystectomy for patients admitted with acute gallbladder pathology is unclear. Some studies have shown that emergency cholecystectomy during the index admission can reduce length of hospital stay with similar rates of conversion to open surgery, complications and mortality compared with a 'delayed' operation following discharge. Others have reported that cholecystectomy during the index acute admission results in higher morbidity, extended length of stay and increased costs. This study examined the cost-effectiveness of emergency versus delayed cholecystectomy for acute benign gallbladder disease. METHODS: Using data from a prospective population-based cohort study examining the outcomes of cholecystectomy in the UK and Ireland, a model-based cost-utility analysis was conducted from the perspective of the UK National Health Service, with a 1-year time horizon for costs and outcomes. Probabilistic sensitivity analysis was used to investigate the impact of parameter uncertainty on the results obtained from the model. RESULTS: Emergency cholecystectomy was found to be less costly (£4570 versus £4720; €5484 versus €5664) and more effective (0·8868 versus 0·8662 QALYs) than delayed cholecystectomy. Probabilistic sensitivity analysis showed that the emergency strategy is more than 60 per cent likely to be cost-effective across willingness-to-pay values for the QALY from £0 to £100 000 (€0-120 000). CONCLUSION: Emergency cholecystectomy is less costly and more effective than delayed cholecystectomy. This approach is likely to be beneficial to patients in terms of improved health outcomes and to the healthcare provider owing to the reduced costs.

Quantification of trace fatty acid methyl esters in diesel fuel by using multidimensional gas chromatography with electron and chemical ionization mass spectrometry.

Measurement of contamination of marine and naval diesel fuels (arising from product mixing or adulteration) with biodiesel or fatty acid methyl esters can be problematic, especially at very low levels. A suitable solution for this task for trace amounts of individual fatty acid methyl esters with resolution and quantification can be achieved by using a multidimensional gas chromatographic approach with electron and chemical ionization mass spectrometric detection. A unique column set comprising a 100 m methyl-siloxane nonpolar first dimension column and high-temperature ionic liquid column in the second dimension enabled identification of individual fatty acid methyl esters at below the lowest concentrations required to be reported in a diesel fuel matrix. Detection limits for individual fatty acid methyl esters compounds ranged from 0.5 to 5.0 mg/L, with excellent linearity up to 5000 mg/L and repeatability of the method from 1.3 to 3.2%. The method was applied to the analysis of diesel fuel samples with suspected biodiesel contamination. Contamination at 568 mg/L was calculated for an unknown sample and interpretation of the results permitted the determination of a likely source of the contamination.

Rapid determination of sildenafil and its analogues in dietary supplements using gas chromatography-triple quadrupole mass spectrometry.

Application of gas chromatography-triple quadrupole mass spectrometry for identification, confirmation and quantification of 6 phosphodiesterase-5 (PDE-5) inhibitors (sildenafil, dimethylsildenafil, homosildenafil, thiosildenafil, thiodimethylsildenafil and thiohomosildenafil) in dietary supplements was investigated. The MS was operated in multiple reaction monitoring mode, for better sensitivity and selectivity. In this manner, the method is adequate to reduce background noise with less interference from co-eluting compounds in the samples. Two different ionisation techniques, electron ionisation (EI) and chemical ionisation (CI), were studied and compared. The chromatographic separation was performed on a short 10 m non-polar capillary column without any derivatisation step. This permitted fast analysis for all analogues with retention time less than 11 min, for both techniques. Use of backflushing can aid method retention time reduction and improves column maintenance. Evaluation of method validation included limit of detection (LOD), lower limit of quantitation (LLOQ), linearity, precision and recovery were performed for both EI and CI techniques. The LOD obtained varied from 0.03 to 1.50 µg/g and the LLOQ ranged from 0.10 to 5.00 µg/g. Good calibration linearity was obtained for all analogues for both techniques, with correlation coefficients (r(2)) higher than 0.99. Mean recoveries of all analogues using CI show higher values (83.4-108.8%) than that of EI (61.9-91.1%). The intra- and inter-assay precisions were evaluated for all analogues at spiked concentration of 10 µg/g and the relative standard deviation was less than 15% for both methods. These methods were then successfully applied to dietary supplement samples without prior derivatisation, confirming that the samples were adulterated with sildenafil and/or its analogues.

Role of mammography in the triple assessment of single-quadrant breast symptoms.

BACKGROUND: Most women over the age of 35 years referred to a breast clinic have single-quadrant symptoms and undergo mammography (MMG) as part of the triple assessment of these. A proportion of these women has no abnormality clinically or on ultrasonography (P1 U1). The aim of this study was to assess the additional contribution of MMG in diagnosing cancer in patients with P1 U1 findings and to consider whether it is safe to be more selective when requesting MMG. METHODS: Over a 2-year interval the clinical and radiological details of women whose single-quadrant breast symptoms were assessed as P1 U1, and who were then sent for MMG, were entered into a database. The results of further investigations initiated by a non-benign MMG report were recorded, and the patients reviewed to establish how many cancers were diagnosed purely by MMG and whether these were located at the site of symptoms. RESULTS: There were 454 women in the study group, representing 17·5 per cent of all new referrals. Twenty-one patients (4·6 per cent) were recalled following a non-benign MMG result, ten of whom required image-guided biopsy. Cancer was diagnosed in three patients (0·7 per cent of the study group), located in the contralateral breast in two women and a different ipsilateral quadrant in one. CONCLUSION: MMG in this subset of patients did not increase the cancer detection rate at the site of symptoms and therefore constituted screening. The rationale for requesting MMG in these patients, and indeed for applying the triple assessment rule, should be reconsidered.

Comprehensive two-dimensional gas chromatography for fingerprint pattern recognition in cachaça production.

Cachaça samples were studied by means of comprehensive two-dimensional gas chromatography and time-of-flight mass spectrometry (GCxGC/TOFMS) during the fermentation process and after ageing in different wood materials. The analyses of the aroma compounds were performed after headspace-solid phase microextraction method (HS-SPME) using an 85microm polyacrylate (PA) fibre. Fingerprint monitoring of the distillation process allowed the easy determination of the turning points of the process and high-resolution comparison of cabeça (head), coração (core) and cauda (tail) fractions. The ageing process in different wood materials was well characterised through fingerprint similarity observations; in the absence of a suitable metric for expressing the overall similarity, here we use a visual and retention time comparison to identify co-incident peaks and those that differ between samples. For quality control purposes, a simple observation of the contour plots obtained can thus allow the identification of the type of wood used in the ageing process, and the process of ageing, without further statistical treatment or peak identifications. In this manner, peaks, which discriminated most between the different mixtures studied were readily found, i.e. unique compounds were identified in each stage of the distillation process. Approximate first dimension linear retention indices (LRI) for these identified compounds were calculated in a bi-dimensional polar/non-polar column set in the GCxGC experiment and were used in conjunction with mass spectral library searching for tentative identification. Along the progression of the distillation process, 70 compounds appear to visually discriminate between samples and their retention indices are indicated, presenting good correlation with literature data.

Modulation-induced error in comprehensive two-dimensional gas chromatographic separations.

There is a fundamental difference between data collected in comprehensive two-dimensional gas chromatographic (GCxGC) separations and data collected by one-dimensional GC techniques (or heart-cut GC techniques). This difference can be ascribed to the fact that GCxGC generates multiple sub-peaks for each analyte, as opposed to other GC techniques that generate only a single chromatographic peak for each analyte. In order to calculate the total signal for the analyte, the most commonly used approach is to consider the cumulative area that results from the integration of each sub-peak. Alternately, the data may be considered using higher order techniques such as the generalized rank annihilation method (GRAM). Regardless of the approach, the potential errors are expected to be greater for trace analytes where the sub-peaks are close to the limit of detection (LOD). This error is also expected to be compounded with phase-induced error, a phenomenon foreign to the measurement of single peaks. Here these sources of error are investigated for the first time using both the traditional integration-based approach and GRAM analysis. The use of simulated data permits the sources of error to be controlled and independently evaluated in a manner not possible with real data. The results of this study show that the error introduced by the modulation process is at worst 1% for analyte signals with a base peak height of 10xLOD and either approach to quantitation is used. Errors due to phase shifting are shown to be of greater concern, especially for trace analytes with only one or two visible sub-peaks. In this case, the error could be as great as 6.4% for symmetrical peaks when a conventional integration approach is used. This is contrasted by GRAM which provides a much more precise result, at worst 1.8% and 0.6% when the modulation ratio (MR) is 1.5 or 3.0, respectively for symmetrical peaks. The data show that for analyses demanding high precision, a MR of 3 should be targeted as a minimum, especially if multivariate techniques are to be used so as to maintain data density in the primary dimension. For rapid screening techniques where precision is not as critical lower MR values can be tolerated. When integration is used, if there are 4-5 visible sub-peaks included for a symmetrical peak at MR=3.0, the data will be reasonably free from phase-shift-induced errors or a negative bias. At MR=1.5, at least 3 sub-peaks must be included for a symmetrical peak. The proposed guidelines should be equally relevant to LCxLC and other similar techniques.

Comprehensive two-dimensional gas chromatography/mass spectrometric analysis of pepper volatiles.

The headspace compositions of 13 pepper and peppercorn samples of different species, colloquially also referred to as pepper, were analyzed, and more than 300 compounds were tentatively characterized by means of comprehensive two-dimensional gas chromatography in tandem with flame ionization detection, quadrupole mass spectrometric detection and time-of-flight mass spectrometric detection (GC x GC-FID, GC x GC/qMS and GC x GC/TOFMS, respectively). The analysis of volatile organic compounds (VOCs) was performed after solid-phase microextraction (SPME) using a 75-microm PDMS/DVB fibre. Fingerprint comparison between the three techniques permitted peaks to be assigned in the GC x GC-FID experiment based on the analogous MS analysis, taking into account retention shifts arising from method variations. When using GC x GC/TOFMS, about five times more peaks were identified than in GC x GC/qMS. Retention indices for all peaks were calculated in the bi-dimensional column set comprising of a 5% phenyl polysilphenylene-siloxane primary column and a polyethylene glycol second column. The spectra obtained by both mass detection techniques (qMS and TOFMS) give very similar results when spectral library searching was performed. The majority of the identified compounds eluted as pure components as a result of high-resolution GC x GC separations, which significantly reduces co-elution, and therefore increases the likelihood that pure spectra can be obtained. The differences between TOFMS and qMS (in fast scanning mode) spectra were generally small. Whilst spectral quality and relative ion ratios across a narrow peak (e.g. w(b) approximately 100-150 ms) do vary more for the fast peaks obtained in GC x GC/qMS operation, than with TOFMS, in general adequate spectral matching with the library can be achieved.

Projection of multidimensional GC data into alternative dimensions-exploiting sample dimensionality and structured retention patterns.

Comprehensive multidimensional gas chromatography (GCxGC) is a powerful separation technique. One of the features of this technique is that it offers separations with more apparent structure than that offered by conventional one-dimensional GC (1-D GC). While some previous studies have alluded to this structure, and used structured retention patterns for some simple classifications, the topic of structured retention in GCxGC has not been studied in any great detail. Using the separation of fatty acid methyl esters (FAME) on both nonpolar/polar and polar/nonpolar column sets, the interaction between the separation dimensions and the sample dimensions is explored here. The GCxGC separation of a series of compounds is presented as a projection of the sample from sample space, a p-dimensional space with dimensions defined by the dimensionality of the sample, into separation space: for GCxGC, a two-dimensional plane passing through the sample space in an orientation defined by the separation conditions. Using this conceptual model and some a priori knowledge of the sample, it is shown how the image of the sample in the separation space can be used to construct an image of the sample in alternate dimensions, such as second dimension retention factor ((2)k) vs. chain length in the case of FAME. These projections into alternate dimensions should facilitate the interpretation of the complex patterns found within the GCxGC chromatogram for the identification and classification of compounds.

Nest- and colony-mate recognition in polydomous colonies of meat ants (Iridomyrmex purpureus).

Workers of polydomous colonies of social insects must recognize not only colony-mates residing in the same nest but also those living in other nests. We investigated the impact of a decentralized colony structure on colony- and nestmate recognition in the polydomous Australian meat ant (Iridomyrmex purpureus). Field experiments showed that ants of colonies with many nests were less aggressive toward alien conspecifics than those of colonies with few nests. In addition, while meat ants were almost never aggressive toward nestmates, they were frequently aggressive when confronted with an individual from a different nest within the same colony. Our chemical analysis of the cuticular hydrocarbons of workers using a novel comprehensive two-dimensional gas chromatography technique that increases the number of quantifiable compounds revealed both colony- and nest-specific patterns. Combined, these data indicate an incomplete transfer of colony odor between the nests of polydomous meat ant colonies.

Application of comprehensive two-dimensional gas chromatography to drugs analysis in doping control.

Comprehensive two-dimensional gas chromatography (GC x GC) now occupies a niche within the GC technology regime. The technique is undeniably unique in the manner in which the experiment is conducted, the way results are presented and the interpretive opportunities offered. For the 1000th volume of this journal it is appropriate to expand upon these features, and review the progress made in GC x GC to date. Firstly, brief general comment is made on multidimensional procedures, and to review key aspects of GC x GC. The use of the targeted multidimensional GC method allows absolute retentions in the second dimension of a GC x GC experiment to be estimated, and also offers a novel way to obtain enhanced response for resolved solutes. Then, to illustrate the utility of the technique, the application of GC x GC to the screening of drugs and their metabolites in biological fluids is described using prolintane metabolites in canine urine as an example, with samples taken at four time intervals after administration. This example illustrates the first application of GC x GC in the field of forensic toxicology, an area traditionally dominated by GC-MS. Most drug compounds were found to be retained on the 0.8-m second column for a greater time than the modulation period (3 s) used for initial analysis, under the conditions described. Hence a 0.4-m D2 BPX50 (50% phenyl methyl polysilphenylene) column was then used throughout, with most compounds retained less than 4 s. For the standard drug mixture, three overlapping drugs on the first dimension column (BPX5) were subsequently baseline resolved on the BPX50 column. For prolintane administration samples, the parent drug and metabolites could be effectively resolved from background matrix peaks. Likewise a 23-drug spike standard in horse urine blank gave acceptable resolution of the drugs from matrix peaks.

Separation of chlorophenoxyacetic acids and chlorophenols by using capillary zone electrophoresis.

In this study, the choice of electrolyte systems for the separation and detection of a range of chlorophenoxyacetic acids and chlorophenols by means of capillary zone electrophoresis (CZE) is discussed. A series of acetate buffers over the buffering capacity pH range 4.03-5.5 were initially chosen for the separation. It was found that chlorophenoxyacetic acids could be separated at pH 4.03 and 4.5 but the most satisfactory separation of chlorophenols was obtained at pH 5.5. The factors affecting separation selectivity, including the addition of organic modifiers, was also studied. The use of 25% 2-butanol, 5% ethylene glycol and 10% acetonitrile as organic solvents resulted in the total separation of both classes of these compounds but poor peak shape of chlorophenols resulted and a number of chlorophenoxyacetic acids were not well separated. A borate-phosphate buffer gave improved peak shape of chlorophenols. Further improved separation of the components of the mixture was obtained by the addition of 2 mM fully methylated-beta-cyclodextrin to the 35 mM borate- 60 mM phosphate buffer at pH 6.5, maintaining good peak shape. In this case, separation of the two compound classes, chlorophenoxyacetic acids and chlorophenols, is achieved, with complete resolution of individual compounds in less than 5 min with high efficiency (of the order of 150,000 plates for the ca. 40 cm column). The method is applied to a commercial 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide mixture.

Analytical study of comprehensive and targeted multidimensional gas chromatography incorporating modulated cryogenic trapping.

This paper reports the results of an analytical study comparing capillary gas chromatography (GC) operated in the normal mode with 2 new GC techniques, comprehensive GC (GC x GC) and targeted (or selective) multidimensional GC, which use a longitudinally modulated cryogenic system (LMCS), recently developed in our laboratory. A high-temperature application of derivatized sterols, of interest in fecal pollution monitoring, was chosen for this work. A directly connected coupled-column ensemble was used, comprising a nonpolar column and a moderately polar column. With LMCS, effluent from the first column is zone-compressed in a cryogenic trap and then pulsed to a short second column, producing narrower peaks with sharp, tall peak responses at the detector. The modulator is operated at a constant frequency, e.g., 0.25 s(-1), to produce the GC x GC result, or is moved in a predefined manner so that whole peaks are selectively trapped and subsequently pulsed through to the second column in the targeted mode. Standard solutions containing a mixture of 7 sterols and 5-alpha-cholestane internal standard were used. Detection sensitivity is increased by a factor of >25 with the use of LMCS. The estimated limit of detection was about 0.1 microg/mL when normal GC with flame ionization detection (GC/FID) and a 1.0 microL splitless injection volume were used, compared with 0.02 and 0.004 microg/mL for the LMCS operated in GC x GC and selective modes, respectively. Calibration curves for GC/FID were linear over the 0.1-2.0 microg/mL range tested. Reproducibilities for the GC x GC and normal GC modes were comparable; generally, relative standard deviations (RSD) were on the order of 3-4%, based on raw peak responses. Improved reproducibility was found for selective LMCS operation, at an RSD of around 2%; with internal standardization, better results were achieved. The coupled-column arrangement allowed complete separation of sterol peaks from overlapping impurity peaks in a number of instances with LMCS modes, and its use should improve data quality over that of normal GC operation, in which the overlapping peaks interfere with measurement of peak response in the normal mode.

Time-resolved cryogenic modulation for targeted multidimensional capillary gas chromatography analysis.

Multidimensional gas chromatography (MDGC) is performed in a new manner, described in this paper. The method incorporates two directly coupled columns and employs a longitudinally modulated cryogenic trap located between the columns. No heartcutting process is used, but rather a method better termed selected zone compression pulsing is used. Compared with normal MDGC, where primary column effluent has to be temporarily diverted either to a monitor detector or to the second dimension column, the new procedure in its simplest mode passes all of the first column effluent to the second column. It is simply the times at which the modulation of the trap is performed that determines which target solutes will be selected for enhanced separation. This approach allows almost instantaneous separation of selected zones on the second column, and has the potential to significantly simplify the MDGC method. Since data are presented in a time-response format, and do not require transformation as previously described for comprehensive GC when using the longitudinal modulator, quantitation and report generation are essentially the same as in any GC method and data system. Advantages also include significant sensitivity improvement. By using cryofocussing, and benefiting from the zone compression effects along with fast GC conditions on the second dimension, new possibilities for MDGC can be realised. The method is demonstrated by using a mixture of semi-volatile aromatic hydrocarbons.

Supercritical-fluid extraction of synthetic pyrethroids from wool.

A stepwise approach was used to develop a supercritical fluid extraction (SFE) method for analysis of synthetic pyrethroids (SPs) on a wool matrix, commencing with a simple inert matrix to examine the solubility of the pyrethroids in the extraction fluid CO(2) and then extended to the real wool matrix. Chemometric approaches were used to determine the SFE optimum conditions. It was found that pyrethroids were readily extractable from an inert matrix over a wide range of pressure (170-350 atm) and at low temperature (<90 degrees C). Subambient hexane efficiently trapped the compounds from the depressurised fluid. Excessively high pressure and temperature resulted in poor trapping, isomerisation and possibly degradation of some components. With spiked wool samples method modifications focused on reducing the coextraction of grease, a bulk matrix component of raw wool. By using alumina (containing 8% moisture) and operating the extraction at 50 degrees C, 200 atm for 60 min, sufficiently clean extracts of pyrethroids suitable for gas chromatography-electron-capture detection analysis were obtained. The recoveries of all SPs were satisfactory (78-101%) over the range of 0.5-5 microg/g levels of these compounds. The precision of the entire analysis procedure was comparable to the conventional Soxhlet extraction method. Detection limits of some commonly used SPs for sheep treatment were also evaluated. Comparable results relative to those achieved by solvent extraction for incurred wool samples were obtained with a recovery of 81-85%. The results, however, suffered high uncertainties (R.S.D. approximately 19-24%) due to the small amount of wool sample taken in each extraction and the suspected inhomogeneity of the wool. Different persistences of cypermethrin isomers in wool were observed.

New operational modes for multidimensional and comprehensive gas chromatography by using cryogenic modulation.

Historically, hardware and method-related concerns have limited the use of multidimensional gas chromatography in the routine laboratory. This paper presents a new approach that offers the potential to significantly alter the manner in which multidimensional gas chromatography is conducted, based on the use of a modulated cryogenic trap which can be moved longitudinally along the column. Two columns are directly coupled, and no switching valves are used. It is demonstrated that a heartcut section can be cryofocused and zone-compressed, and then rapidly remobilized at the prevailing column oven temperature without any supplementary heating. A short second dimension column is used, giving fast second dimension analysis. This allows a large number of heartcuts to be programmed for any one analysis. The 'ultimate' manifestation of multidimensional gas chromatography is the comprehensive GC technique (GC X GC). This is now simply effected by performing very rapid heartcuts at intervals on the order of 1/5th of the peak width of primary dimension peaks, and requires that the second dimension be able to complete the analysis of each collected zone on a similar timeframe. This paper uses a semi-volatile aromatic mixture to demonstrate these selected operational modes, that can be achieved with the longitudinal modulation method. The flexibility that arises from this approach is shown by the ability to swap between selected whole-peak enhancement and comprehensive modes during the one analytical run. The increased sensitivity that follows from peak compression is a further advantage, which would be beneficial for trace analysis.

Enantiomeric separation of propranolol and selected metabolites by using capillary electrophoresis with hydroxypropyl-beta-cyclodextrin as chiral selector.

A capillary electrophoresis (CE) investigation of the enantiomeric separation of propranolol and some of its metabolites using CE was undertaken. Resolution of the enantiomers was achieved using hydroxypropyl-beta-cyclodextrin (HP-beta-CD) as the chiral selector. Parameters found to influence separation include cyclodextrin concentration, potential, pH and organic solvent/additive. It was observed that 17 mM HP-beta-CD gave optimum separation over the concentration range used in this study, however different racemates appear to have best resolution at different CD concentration. The potential does not have a great effect on enantiomer resolution, but appears to cause relative metabolite migration times to alter such that separation is affected. Carrier pH affects both migration time, and enantiomer resolution and metabolite separation. Above pH 5 inferior results are obtained. This is the first report of enantiomeric resolution of propranolol metabolites using CE.

Longitudinally modulated cryogenic system. A generally applicable approach to solute trapping and mobilization in gas chromatography.

This paper describes a novel approach to solute trapping and remobilization. It involves the use of a subambient trap, with a narrow capillary column passing through the cooled region. A mechanism allows for longitudinal movement of the trap relative to the chromatographic column or narrow transfer line through which analytes travel. Either the trap or the column can be moved, and the frequency or manner of relative movement determines the type of result obtained. A series of preliminary studies are described that define the general approach to using this device and demonstrate the unique benefits that may arise from the modulation movement. Significant improvement (reduction) in peak width occurs if the device is placed immediately prior to the detection system, and consequently a great increase in detection limits results. With a 25 cm length of capillary column between the trap and detector, it is calculated that the plate height of dodecane is 0.082 mm, equivalent to 12 100 plates/m. This was found to be much greater than that for dodecane analyzed on a 25 m column. By slow displacement of the column through the trap, it is demonstrated that the solute is trapped in the first 1 cm (or less) of the column located in the cold trap.